|
Industrial
Minerals (NZ) Ltd
Steel
Grit and Shot is manufactured under the watchful eye of
SINTOBRATOR
Japan, meets ISO9002 Quality Standards and has been certified by BVQi.
Stocks of Steel Grit and Shot are kept in both the North & South Island.
|
COARSE |
STEEL GRIT SELECTION GUIDE |
| CH12 / GH14 /GH16 |
Blast Cleaning large to medium steel and iron castings |
| GH18 / GH25 / GH40 |
Granite Cutting, Blast Cleaning Castings, Cleaning Structural Steel |
| GH50 / GH80 |
Cleaning Non-ferrous Casting and Structural Steels |
|
FINE |
|
Industrial Minerals Steel Grit is of a Consistent high quality and is rigorously inspected to ensure:

- Correct chemical composition of the molten metal
- Hardness
- Density
- Shape
- Microstructure
- Size distribution
- Durability of the finished product
|
COARSE |
STEEL SHOT SELECTION GUIDE |
| S660 |
Blast Cleaning large steel and iron castings |
| S550 / S460 |
Blast Cleaning large to
medium steel and iron castings |
| S390 / S330 |
Blast Cleaning medium to small steel and iron castings |
| S290 |
Blast Cleaning precision castings. Peening medium thin sheets |
|
FINE |
|
Industrial Minerals Steel Shot is of a Consistent high quality and is rigorously inspected to ensure:

- Correct chemical composition of the molten metal
- Over 90% of particles achieve a hardness of 40-50 HRc.
- Over 80% of particles shall be as spherical as commercially possible.
- Micro structure shall be uniform martensite.
- Size distribution
- Durability of the finished product
Sizes, other than those listed above, are available.
Please contact us for further details.
The information provided is, to the best of our knowledge, representative of the
product. Natural products do vary, so these figures are approximations for
guidance only. As conditions of use are beyond our control, no liability is
accepted for any loss or damage sustained arising from the use of this
information or any products. Because of ongoing development the product
parameters may be changed without notice.
|