Industrial Minerals (NZ) Ltd  

Garnet is the preferred abrasive blasting media in New Zealand.

Industrial Minerals (NZ) Ltd supplies many types and grades of Garnet.

The most common grades are:

A Grade 1.40 - 0.50 mm 

Suitable for heavy applications that require a very coarse profile.

B Grade 1.00 - 0.30 mm  20/60 mesh

Suitable for booth blasting and painted steel applications that require a coarse profile.

C Grade 0.71 - 0.21 mm  30/60 mesh

Suitable for Medium applications such as Mill Scale, booth blasting and painted steel  that require a medium profile.

D Grade 0.35 - 0.18 mm  80 mesh

Suitable for lighter applications such that require a light profile.

E Grade 0.25 - 0.10 mm 

Suitable for Fine applications that require a very light, or, no profile such as vehicle restoration, water jet cutting and turbine blades.

Garnet is available washed or unwashed (low Chloride) and is packaged either loose in 1 tonne bulk bags or in 25kg bags with 40 x 25kg bags packed into a 1 tonne bulk bags. 

Garnet is stocked at all our main distribution centres.

The information provided is, to the best of our knowledge, representative of the product.  Natural products do vary, so these figures are approximations for guidance only.  As conditions of use are beyond our control, no liability is accepted for any loss or damage sustained arising from the use of this information or any products.  Because of ongoing development the product parameters may be changed without notice.

If you have any questions or comments about this web site free phone 0800 646 3725 (New Zealand) or 1800 309 734 (Australia) or go to our feedback page

Copyright © 2006-2010 Industrial Minerals (NZ) Ltd