Industrial Minerals (NZ) Ltd
|
|
|
|
The Clemco Advantage
Clemco has World Wide Experience and has been selling specialised blast equipment since 1941. From "off the shelf " solutions to highly customised blast facilities, Industrial Minerals (NZ) Ltd and Clemco are able to provide, top of the line, tried and tested, abrasive blast rooms. Bucket Elevator Recovery System
This set up is most commonly used where Steel Grit is the preferred abrasive.
Vacuum Recovery System
Each component of the Clemco Blast Room is available as a separate unit. Also, replacement parts are only a phone call away. Design & Build Systems From fully automated Dry Strip Blast facilities right down to a "pot-in-a-box" (a blast pot in a converted shipping container) Industrial Minerals (NZ) Ltd are able to offer the correct solution. With Reclaimers, dust filters, and Automation Technology, Industrial Minerals are able to call on the many, many years experience of Clemco and Aerolyte Systems.
|
If you have any questions or comments about this web site either free phone 0800 646 3725 or go to our feedback pageCopyright © 2006-2007 Industrial Minerals (NZ) Ltd |
Typically, Blast Rooms
and Specialist Abrasive Blast Facilities represent a major investment for most
companies and it is vital that the equipment chosen is "fit for purpose".
For
heavier abrasives Clemco recommend a flat track / bucket elevator recovery
system with abrasive reclaimer and dust extraction system.
For
lighter abrasives, such as Garnet, Clemco recommend the M Section / vacuum
recovery system with reclaimer and dust extraction system.